This is our interntional part of the forum. In this forum we discuss hunting, shooting, firearms, reloading and much more.
Feel free to ask us anyting in english about the topics mentioned above in this part of the forum.
Eftersom jag äger och driver forumet så tar jag mig friheten och postar detta inlägget globalt!
Jag har lite vapen jag behöver bli av med, Eftersom jag behöver få ihop 20 transaktioner/ år enligt polisen så behöver jag nu bli av med några vapen med...
Hello everybody that have a hard time to understand the threads in Swedish or Norwegian here at Robsoft! This is the place for you to get in contact with us here at Robsoft.
Just keep your postings polite and without any illegal content and you...
Senaste inlägget
Southern hemisphere cross-breed :mrgreen: now living up here in the Swedish fridge. So I'll make myself at home in here and translate any nonsense that the Swedish robsofters write ;)
That's cool knowing that i have you to explain the words i don't...
I am Thomas and came here by searching for information about the 6x45 or 6mm-223 made from a .223 Rem.
Just a little bit about me:
I am a sport shooter, hunter and reloader. Member of a shooting club in the middle of Germany and also...
Senaste inlägget
I have no experience of 6x45 but I have a 6PPC for hunting birds, small game and roedeer. In my experience, there is a significant lack of good hunting bullets in 6mm under the weight of 80 gr leadfree and 90 gr leaded bullets.
So, if the main goal...
I've been a member for a while and I thought this would be the
best place to say Hi.
I'm a Builder here in Australia and enjoy all the usual outdoor activities and have
a passion for older Sako rifles, that being what lead me here to the robsoft...
I live close to the finish border in the northern part of sweden and learned on the hunting exam that the white tail deer population has spread from Finland up to the north of Sweden.
In the past 1,5 years i have been in the forrests a lot...
I’ve recently joined this forum. I live in Finland.
I recently bought a mcmillan sako varmint stock. It was super light, and now the balance is on the front. I belive the recoil pad us glued, not screwed. Has anyone any tips how to remove the pad...
Has someone done hva 1600/1640 cal 6.5x55 rebarreling to a larger cal. Ie. 6.5x284?
I talked with a local gunsmith some time ago and he told me that the 1600 -series lock should generously bear the pressure. He said...
Senaste inlägget
Bullet weight may be less a factor in your friends two rifles than than simply the variation of performance with different factory loads that is common. My own Husqvana .30/06 shoots equally well with 150 and 180 grain bullets, in my handloads. It...
I have a couple of AI Rifles from around the world and I would love to add a Swedish PSG-90 to my collection, I was wondering if there are any in civilian hands and if some of them might be sold with the adoption of a new rifle or it is...
Senaste inlägget
Isn't PSG90 exactly the same as L96A1 AW (Arctic Warfare)? Maybe you can find it abroad though I doubt it. Even in the countries with the most relaxed gun laws they tend to squint when you apply for a gun permit regarding a potent extremely accurate...
Hi guys, looking for info on a Husqvarna 1900 in .308, number 622613. I have paid a deposit on a bit of an odd-ball Husqvarna 1900, odd as it has a 70cm untapered barrel. Just wanting to learn a little of the pedigree before I fully commit.
Senaste inlägget
Lennart was in the business in December at least. He made a trigger job on my CG1900 308 then.
I was talking to my good friend in Sweden Stefan discussing Moose / Elg hunting opportunities and he suggested I touch base here.
I have been fortunate to shoot at the World Benchrest Championship in Umea back in 2003. Its a great part of the...
Senaste inlägget
I used A-frame 500 and barnes solids. At home I us a-frame 500 for moosehunting. It might be a bit owerkill, but the bullet is hard, så it goes right throu the animal and doesn't damage the meat more than a caliber .30 that is the most used caliber...
Lack of information in my country brings me here, to homeland of Sweedish mausers. Few months ago, during 300m prone shooting competition i had opportunity to shoot one of the M80 Gustavs. Love...
Senaste inlägget
Hi Friends!
My name is Michal, and I'm sport shooter.
Lack of information in my country brings me here, to homeland of Sweedish mausers. Few months ago, during 300m prone shooting competition i had opportunity to shoot one of the M80 Gustavs. Love...
I'm new to this group. My name is Mike. I've got a company that teaches hunting courses on big game (Red Dear, Wild Boar, Muflon etc). Amonst my courses there's also a medium range hunting course, up to 300m shooting. For expending this...
Hey guys! I have come here to seek information about the Madsen LMGs that the Swedes used back in the day. What I am really jonesing for actually are possible sources for parts kits, photos, maybe even blueprints. I know it is a long shot but I am...
Senaste inlägget
Madsen machine gun - Wikipedia
Wikipedia220 × 243Sök med bild
Operating cycle of the Madsen
Krut.se is looking for somebody to translate their web page from Swedish to Italian. In return you'll get invited to a two day hunt in October. Any Italians on Robsoft?
Sent from my iPad using Tapatalk HD
Senaste inlägget
I don't speak a word of Sweduish but if you need some help with the Italian i am here
My brother inlaw sent me these picture's.This is his friends cousin who accidently fired a 270 win in his 7mm mag.
He was very lucky but they did take some schrapnel out of his eye and face.
One would think that a 270 in a 7mm wouldn't be to bad as...
Senaste inlägget
It´s too late for your brothers friends cousin, you can e-mail this article to him though:
onclick= window.open(this.href);return false;
There´s more to it than bullet diameter - case lenght/diameter and shoulder geometry will also have an...
I am well. Hope you are. Tell Brother Walt and Brother Elmer the Marine Corps beats working for old man Minch by a mile. Tell them to join up quick before all of the places are filled.
These are a few knives using Lauri, and Polar blades. Have to peen the tangs yet, and a few more coats of oil finish. Now need to learn how to make sheaths.
I went to my blind this morning, in Minnesota and carried my R8 in 9.3X62. I jumped a deer off of the plowed up soybean field in the dark. The wind blew hard all morning and it was cold. I went back and grabbed some breakfast and went back to the...
Senaste inlägget
I am very shocked to see such pictures of hunting. It is very rude to kill those poor animals just for fun. One will not share or post such things to the public, so that a wrong message will convey to them. There are many other things to take as a...
I am dabbling with knife making. Going to try a nice Puukko next. Here are three patterns I drew up. They have slight variations. Will transfer them onto some plexiglass, then decide which to try first. Have curly birch, and birchbark, red spacer...
I am trying to complete a Swedish Target Rifle CG-80 and need a buttplate assembly (with or without aluminum base), please.
Thank you.
I can PayPal you, or trade for items/parts you need. I am in USA.
Senaste inlägget
while we are at it, below are other items I am trying to locate. Thank you.
this is what I am looking for presently:
CG-80 buttplate (have a curved aluminum stock plate on mine, without an actual buttplate or hardware).
Swedish Range disks and...
Went out on a mission to buy a Macbook Pro computer today, ended up buying a BMW car. I always wanted a good english made car, so I bought a BMW. Boy did I get screwed! Got home, looked at the paperwork, and discovered this particular BMW was made...
Senaste inlägget
Well I have been gettin along nicely with my little BMW sedan for a few years now. Got a new job requiring a good bit of travel, and needed to be able to carry a lot of product samples, so today, I added another BMW to the remuda. It is a 2005 BMW...
In an effort to help the slow US economy, I purchased a couple new Zeiss scopes last week. A 3-9X50 Zeiss Conquest, and a 2.5-10X50 Zeiss Victory Diavari, with number 60 Il. ret. I also bought a Blaser C case, and a used pair of Swarovski 8X30 SLC...
Senaste inlägget
Do you know if Zeiss or Swaro have any production in the US?
All Swarovski Z3s, and Z5s are assembled in the US, and distributed to the whole world. All non illuminated Z6s intended for the US market, are assembled in the US.
Hej jag hade tänkt köpa mig en Accuracy International AE MK III 243 Win om det är möjligt?
Är det någon som här som har importerat själv eller vet hur man skall gå till väga för att bli ägare till ett sånt vapen via import?
Och/eller finns det...
Senaste inlägget
Krävs samma papper för att importera en stock?
En stock är licensfri. Bara att beställa. Är det inom EU är det ingen tull dessutom.
Borde vara tillståndsfri, så är dock inte fallet, flertalet av de stockar vi talar om ses som krigsmaterial, ergo...
I got a new Blaser barrel in an 8,5X63 REB and here is a sample of my fireforming load. This fireforming load about duplicates the 338 Federal as it cronographed out at 2525 FPS.
I shot it about 150 times with three different powders and groups...
Senaste inlägget
I shot a raccoon last year. Seemed pretty effective.
Tim decided to tie the knot with his long time girlfriend. One evening, after the honeymoon, he was assembling some loads for an upcoming hunt.
His wife was standing there at the bench watching him. After along period of silence she finally speaks....
I do not smoke, and have thought at times in the past, that banning smoking would not affect me, as a non smoker. But after giving it a lot of thought, my thinking it would not affect me may be incorrect. If we ban smoking, the...
It has been very dry here, but I hired a guy to bush hog the weeds, and brush off, then it rained a couple times, then things greened up nicely. The neighbors places are eat down to the dirt by cattle, so my little 40 acres is about the only forage...
Why would anyone prefer a Blaser BBF 95, over the 97?
Senaste inlägget
i use my BBF95 for birdh hunting in the woods. both with dog and steel hunting. i have never had use of both barrels on the same birdh. so for me it is a saftey issue, after firing one barrel the gun is safe again. 12*76 and 6,5*55 Swedish mauser.
Hey guys. (i write this in English instead of Norwegian to prevent missunderstandings)
I know this is a Swedish site but hoping you guys know something that can help me?
I'm moving from Norway to Finland this fall/winter and I'm starting practical...
Senaste inlägget
Man kan kanske ringa hit och höra
onclick= window.open(this.href);return false;
I was thinking today, and was in a kind of mood to ponder life, and what it takes to be happy. We are under a lot more stress, and live a much faster life, than that of our ancestors. Life was hard in the past for many of them, but a simpler time...
Senaste inlägget
It's a very thougtworty approach to life, without a doubt.
There are those of us who actually might achieve our goals, and then there are women. :mrgreen:
In my case it's a house out in the woods not too far from the civilisation, one or a couple...
is there anybody who can suggest the recipe for beaver gland drink?
have heard quite a number of legends about the stuff, castoreum.
but the recipe seems to be a well kept secret.
google says, you swedes seem to have a tradition of bäverhöjt .
I...
Senaste inlägget
Dry the glands in open air for a month or more.
Put it in vodka for another month or more. You only need one.
After some time the vodka will get a whisky-like color and can be used to flavour your vodka shots.
I'm British but now live, work and hunt :D in Norway.
I'm interested in purchasing a shorthair dachs/ tax for hunting and I'm aware that Sweden has some fantastic hunting lines. I would be most grateful if somebody could point me in the...
Senaste inlägget
One of the best kennels: onclick= window.open(this.href);return false;
I shot an elk cow yesterday on a cull hunt. I used a 9.3X62 loaded with a Norma 232 grain Vulcan. I attempted a shot at the junction of the head and neck at about 100 meters. The bullet struck the cow frontally on the tip of the chin and exploded,...
Senaste inlägget
Congratulations. I suggest that you should use the Oryx bullet next time, if you like to continue with Normas bullets.
Börje
-1 8)
I have available newly manufactured M3.5X0.6X6mm screws to fit the vintage Sako Split Ring Scope mounts. I also have available newly manufactured sight hoods to fit pre-1972 Sako rifles. I manufactured these for members of the Sako Collectors Club:...
Senaste inlägget
Jag vill bara tillägga att tslans är en hyvens karl och hans produkter är top of the line!
The thing is we're (me+wife+kids) are seriously considering moving from Sweden to the USA. We've stayed here in Scandinavia almost 10 years and I figure it's fair to get the kids to know the US as well...
Senaste inlägget
I think that Maine would be more of what your used to hunting wise, and living in Boston might be a choice for work. Folks in Boston are pretty nice, but note that the state of Mass. has some pretty screwed up gun laws, compared to most of the other...
Du kan inte skapa nya trådar i denna kategori Du kan inte svara på trådar i denna kategori Du kan inte redigera dina inlägg i denna kategori Du kan inte ta bort dina inlägg i denna kategori Du kan inte bifoga filer i denna kategori
